Mini transmitter, control unit (transmitter) has the following solutions: 

-feedback information can be done via: LED diode and / or graphic display; 

- 1-6 manipulators or optionally 1-3 joysticks

-additionally has various switches Various toggle switches, pushbuttons and rotary switches

-Operational time: approx. 10 hours on a single charge

-Operating range > 100m / < ~330 ft.

- The maximum speed of proportional movements can

be adjusted using a “turtle/rabbit” toggle switch in five steps.

- The transmitter communicates with the corresponding receiver using  and a unique identity code. This guarantees that no other Scanreco transmitter or other product can ever activate the machine unintentionally.

-Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)

Receiver has the following solutions:

- standard antenna

- Supply voltage: 12/24 VDC

- CAN-Open interface

-14 digital outputs (including dump valve)

-3 digital inputs + 1 configurable digital input/output

- 8 bi-directional proportional outputs PWM (current control) or Raziometric voltage (the voltage is referred to as a percentage of the supply voltage, Danfoss)

- Two-way communication

- Each Scanreco system has a unique identity code where the receiver only talks with its paired transmitter(s)

- Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)

- Dimensions (W x H x D): 233 x 205 x 77 mm / ~9.17 x 8.07 x 3.03

in (height incl. Antenna)

- Weight: 1.2 kg / ~2.6 lbs.

- Stop function in accordance with EN ISO 13849-1 cat. 3, PL e

- Cable control: Standard length 10 meters / ~33 ft.

- Operational temperature: -25°C to +70°C / ~-15°F to +160°F

- Protection category: IP 65

The presented Scanreco radio control can be adapted to your own needs.

Choose from the above parameters the functions that suit your preferences

Suggestions for the appearance of your transmitter: