RADIO REMOTE CONTROLLER HETRONIC 4-FUNCTION WITH ACTUATORS 24V TRANSMITTER NOVA L

Product characteristics:

Technical Specifcation Transmitter Nova L: 

• Housing: Ergonomically designed Impact Resistant Polymer Composite
• Environmental Protection: IP 65 (Exceeds Nema 12/13)
• Weight : ~0.745kg (1.6lbs) depending on configuration
• Dimensions : Height: 235 mm x Width: 160 mm x Depth: 95 mm
• BATTERY RATING/TYPE : 3.6V NiMH rechargeable battery pack or battery adaptor with 3 1.5V AA batteries
• Antenna: Internal as default, external via TNC connector on request
• Power Supply 3.6V NiMH rechargeable battery; 5 to 30V for cable control
• Diagnostics: Status LED for operation and standard/advanced low battery detection
• Battery Operation Time Min 12 – 20 hrs continuous transmission (the average working time depends on the configuration of the transmitter)
• Control Configuration : 2x Single/Dual/Triple axis cross joysticks ; 6x Single axis paddle levers ; Combination of key switches, toggle switches, push buttons, rotary switches, potentiometers and stop switches ; Customized switches available upon request
• OPERATING RANGE :Typically 100m. Varies depending RF output. ï 2.4GHz typically between 30-50m
• Frequency Range: 4xxMHz or 8xxMhz or 9xxMHz or 1.216GHz or 2.4GHz
• Power (RF Output) Typically ≤ 10mW E.I.R.P
• Typical Operating Range: 150m (492ft) for ≤ 1GHz 10mW module (Line-of-Sight) 70m (150ft) for 2.4GHz 10mW module
• Safety: 20-bit programmable address concept with up to 1mln combinations; Active & Passive Stop Function ; Parity and Checksum ; Address Module (ADMO)
• Operating Temperature Range: -25°C . . . 70°C (-13°F . . . 158°F)
• Humidity Range 0 - 97% maximum non-condensing
• Response Time: Less than 100 msec.
• Accessories and options : Belly belt, neck belt, chest belt or shoulder bar ; Cushion and customer logo option; Optional Custom housing colour ; RS232/CAN Cable control
• TFT Back-lit monochrome TFT 120x32
• OPTION :Neck Belt ;Touch sensor with LED Signal

Technical Specification Receiver BMP-2:

• 1 E-Stop output
• 1 safety valve output
• 11 hardwired digital outputs
• Expansion of up to 16 additional digital outputs and depending on the type of transmitter:8x2 PWM outputs ; 6 digital inputs or 8 analog outputs ; 8 switching outputs for valve power supply ; error inputs for Sauer-Danfoss valve; 6 digital inputs
• CAN interface for control and feedback
• RS232 interface for cable control, programming
• Expanded self-diagnostics with 3 segment LED display
• Back-up cable control interface with sure seal connector
• 12VDC or 24VDC supply power for DC cranes/machines
• Built-in Hetronic 70 pin quick disconnect connector
• External antenna
• Protective System IP 65
• System Synthesizer Technology
• Decoding Multiple bit scanning, self-monitoring
• Fuses 7.5 amp. / 80 V car fuse
• Output Intrinsically safe emergency stop with double - FET, 1 safety valve (dump valve), 11 digital, 16 internal digital
• Antenna connection TNC - socket
• Dimensions L x B x H: 245 mm x 161 mm x 90 mm (10.4 in x 6.3 in x 4.4 in)
• Weight - 2,5 kg ( 5.5 lbs)
• Frequency 70 cm Band (Selectable 458.800 Mhz to 459.175 Mhz) or CS434
• Range approx. 100 m ( 328 ft.)
• Address 20-bit - 1,000,000 possible
• Operating temperature -30° to +70° C (-22° F to 158° F)
• Data Format 2400/4800 Baud, even parity, 8 data bits, 2 stop bits, hamming distance 4 

Technical Information Electromechanical proportional actuators MEC-HL: 

• power supply voltage : 12V or 24V 
• current required under maximum stress ~ 1,9 A
• protection class IP 65
• maximum speed movement 6mm/s
• absolute value of transmissible force 350 N (76,68 lb)
• maximum stroke 25 + 25 mm (1+1 inch)
• maxi tolerable axial load 400 N (89,92 lb)
• max tolerable radial load 15N (3,37 lb)
• average movement accuracy 0,1 mm (0,0039 inch)
• operating temperature  -25° + 70°C (-18° ÷ 160° F) 
• weight 1580g (3,48 lb) 
• connection Amphenol 6P + PE
• tolerable mounting position 0° ÷ 360° 
• external dimensions 44x 182 x 82 mm (1,73 x 7,16 x 3,22 inch )
• locking to stem M8
• locking holes N°2 M6x10 

The presented Scanreco radio control can be adapted to your own needs.
Choose from the above parameters the functions that suit your preferences

Suggestions for the appearance of your transmitter