valve Walvoil DPX 100 6 functions 12VDC with levers max flow 120l/min + Scanreco Radio RC 400 6 functions with 6 manipulators

Product characteristics 
Scanreco Radio Controller RC 400 6 functions with 6 manipulators :

Mini transmitter, control unit (transmitter) has the following solutions: 

• feedback information can be done via: LED diode and / or graphic display; 
• 1-6 manipulators or optionally 1-3 joysticks
• -additionally has various switches Various toggle switches, pushbuttons and rotary switches
• Operational time: approx. 10 hours on a single charge
• Operating range > 100m / < ~330 ft.
• Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
• The maximum speed of proportional movements can be adjusted using a “turtle/rabbit” toggle switch in five steps.
• The transmitter communicates with the corresponding receiver using  and a unique identity code. This guarantees that no other Scanreco transmitter or other product can ever activate the machine unintentionally
• - Stop function in accordance with EN ISO 13849-1 cat. 3, PL e
• - Cable control: Standard length 10 meters / ~33 ft.
• - Operational temperature: -25°C to +70°C / ~-15°F to +160°F
• - Protection category: IP 65

Receiver has the following solutions:

• standard antenna
•  Supply voltage: 12/24 VDC
•  CAN-Open interface
• 14 digital outputs (including dump valve)
• 3 digital inputs + 1 configurable digital input/output
• 8 bi-directional proportional outputs PWM (current control) or Raziometric voltage (the voltage is referred to as a percentage of the supply voltage, Danfoss)
• Two-way communication
• Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
•  Each Scanreco system has a unique identity code where the receiver only talks with its paired transmitter(s)
•  Dimensions (W x H x D): 233 x 205 x 77 mm / ~9.17 x 8.07 x 3.03 in (height incl. Antenna)
• Weight: 1.2 kg / ~2.6 lbs
• Stop function in accordance with EN ISO 13849-1 cat. 3, PL e
• Cable control: Standard length 10 meters / ~33 ft.
• Operational temperature: -25°C to +70°C / ~-15°F to +160°F
• Protection category: IP 65

Product characteristics
Full proportional hydraulic valve Walvoil 6 sections:

• Full proportional hydraulic valve Walvoil DPX100 / 4 / AM1 (TGW3-175 / LT) ... RDR (03) -NOTAP (L) -12VDC4-way prop valve 120l / min.-300bar-3/4 "-1/2" DPX100 / 4 / AM1 (TGW3-175 / LT) QE-E104 (100) -8EB3TQE-E104 (100) -8EB3TQE-E104 (100) -8EB3TQE-E104 (100) -8EB3TRDR (03) -NOTAP (L) -12V DC
• Proportional control consisting of: Joystick AJW P-Handle: Pos. X + Y: Roller housing: Material: Die-cast aluminum Protection class IP66
• Inside dimensions 178 x 155 x 74
• Outside dimensions 192 x 168 x 80
• Fixing dimensions 168 x 149 - Ø6.51x CED4001x fuse 10A lines: 1x 3m connection line between control housing and joystick1x 3m line for power supply with 3-pin DIN plug 8x 2.8m line for valve plug AMP-JPT 2 pin
• Inlet plate: For open center circuit (fixed displacement pump) - DBV 40-220bar - compensator - connections P + T + LS (LS closed) - 120l / min - pmax 300 bar
• 1st section: 4/3 middle: A + B closed electro-hydraulic on both sides
• Control with AMP-JPT plug slide: 100l / min
• 2nd section: 4/3 middle: A + B closed electro-hydraulic on both sides
• Control with AMP-JPT plug slide: 100l / min
• 3rd section: 4/3 middle: A + B closed electro-hydraulic on both sides
• Control with AMP-JPT plug slide: 100l / min
• 4th section: 4/3 middle: A + B closed electro-hydraulic on both sides
• Control with AMP-JPT connector
• Slide: 100l / min
• Outlet plate: with bleed valve (LS relief) - with pressure reducing valve - control connection "V" closed and drainage connection "L" open - side connections "T1", "P1", "LS1" closed DBV fixed and sealed to 175 bar at 90 l / min

See also our suggestions related to this product:

Suggestions for the appearance of your transmitter