Scanreco Radio Controller RC 400 6 functions with 6 manipulators

Product characteristics 

Mini transmitter, control unit (transmitter) has the following solutions:   

• feedback information can be done via: LED diode and / or graphic display; 
• 1-6 manipulators or optionally 1-3 joysticks
• additionally has various switches Various toggle switches, pushbuttons and rotary switches
• Operational time: approx. 10 hours on a single charge
• Operating range > 100m / < ~330 ft.
• Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
• The maximum speed of proportional movements can be adjusted using a “turtle/rabbit” toggle switch in five steps
• The transmitter communicates with the corresponding receiver using  and a unique identity code. This guarantees that no other Scanreco transmitter or other product can ever activate the machine unintentionally.

Receiver has the following solutions:

•  standard antenna
• Supply voltage: 12/24 VDC
• CAN-Open interface
• 14 digital outputs (including dump valve)
• 3 digital inputs + 1 configurable digital input/output
• 8 bi-directional proportional outputs PWM (current control) or Raziometric voltage (the voltage is referred to as a percentage of the supply voltage, Danfoss)
•  Two-way communication
• Frequency bands: 433-434 or 902-928MHz (other frequencies available on request)
• Each Scanreco system has a unique identity code where the receiver only talks with its paired transmitter(s)
• Dimensions (W x H x D): 233 x 205 x 77 mm / ~9.17 x 8.07 x 3.03 in (height incl. Antenna)
• Weight: 1.2 kg / ~2.6 lbs.

Frequency bands: 433-434 or 902-928MHz

Stop function in accordance with EN ISO 13849-1 cat. 3, PL e

Operational temperature: -25°C to +70°C / ~-15°F to +160°F

Protection category: IP 65

The presented Scanreco radio control can be adapted to your own needs.
Choose from the above parameters the functions that suit your preferences

Suggestions for the appearance of your transmitter:

Suggestions for the appearance of your transmitter