BATTERY SCANRECO 7.2 VDC 2000 MAH A2000380100 TYPE 592

$165

battery Scanreco type 592

Code A2000380100

Suitable for bttery charges / part. no. 434, 435 and 439

Ask about price

Ask about product price


Please fill up below informations. System will send price for requested product immediately to email address provided.

* Required fields

Cancel or 

The battery is mounted in a portable charger, which makes it resistant to impacts and weather conditions. The Nickel Metal Hybrid (NiMH) battery is charged at 7.2 VDC and is short-circuit protected.

 

Battery parameters:

  • Type: 6 Cell NiMH battery
  • Nominal voltage: 7.2 VDC / 2000 mAh
  • Ambient temperature (Celsius /Farenheit): -0°C to +45°C /approx. -32°F to to +115°F
  • Dimensions (WxHxD): 150x50x28 mm
  • Weight: 0,20 kg
  • IP Class: IP65

Important notice: 

  • the battery capacity is 8 hours of operation
  • when the battery needs charging, the control panel beeps 3 times and the LED on the control panel starts blinking at the same time
  • The battery should be used until the LED goes out, then it can be replaced. If the battery capacity is too low, the control unit cannot be activated
  • In extremely low temperatures, battery capacity and operational efficiency are reduced. The battery is automatically charged during operation by cablecontrol
  • the control unit is automatically turned off when the unit is left idle for approximately five (5) minutes
A20000380100
40 Items